If the date or time watermark doesn't match up with the actual time there are a few ways to fix it.
Sometimes the issue happens right after a Daylight Saving Time change which means that DST either hasn't been set or set for the wrong dates/times.
Another way for this to happen is when the Recorder is on a standalone network and not able to retrieve the current time from a time server. The clock can drift over a period of time.
Another possibility is that the clock was set for the wrong time and just needs to be set.
Here is a video that shows how to change the time and also set DST.
Search Knowledge Base Articles
Correcting the Time - The Date and/or Time is out of Sync
Did you find this article useful?
In the right hand panel, near the top, you'll see the name of your recorder listed. Right-click on the recorder name Click Main Stream Video ...
Here are the steps:If you don't have the Playback panel open, open the Playback panel by going to Home Screen > Playback Click Events Check the box...
All recordings are stored on the InVidia SRx NVR. You must download a copy of the file to your PC.To do this follow these steps:You must be able...
Here are the stepsOn the Home Page, click DEVICES (located on the bottom row) From the Devices screen, click MANUAL ADD (bottom left corner) Fill in t...
Most users want to start the InVidia SRx software and go right to displaying the interview rooms. There are a couple settings to update to make ...